Installation of ceramic sinks
Repairs / / August 12, 2017
- block water
- dismantling of the old shell
- installing a new sink
- open the valve the water supply
To replace the sink in the bathroom or on thekitchen, there is no need to wait for plumbing.This elementary work is quite possible to do it yourself, look at how.First close the water taps, and then proceed with the dismantling of the old shell.
When removing old plumbing, unscrew the fastening element of the crane, disconnect the flexible water hose, remove the trap and carefully drain the water from it, take out the drain pipe of the siphon pipe sewer pipes.You can then proceed to the removal of the old shell with arms and start thinking about how to install the sink, you purchased for replacement.
After the old shell is removed from the brackets or pedestals and opens early closing sanitary equipment space, pay attention to the condition of the walls.If you notice that the point of contact of the wall and the sink was formed fungus, which is not uncom
The next stage involves the installation of a new shell on a stand or bracket.It is worth noting that some do not know how to install the sink, attach the brackets to the old seats.Should not do so in this case the bracket can not withstand a weight of the shell.Therefore it is better to take a punch, punch them new holes in the wall, put in a plug these holes and then secure the bracket.
Bowl sinks set into place and now you can begin refitting the captured earlier plumbing.To do this, attach the crane, connect the flexible water supply hose hook the siphon, recalculate the drain pipe into the socket sewer pipes.Thus, in your bathroom or kitchen sink will be new and can only open the valve the water supply and check the quality of work done by you.