How to work with a router manual : work rules
Miscellaneous / / August 12, 2017
- milling high-power machine
- milling table
joinery, rather thorough possession of his skills will help a person to carry out any ideas for upgrading its interior,and, if desired, and to establish its own mini-production, which will ensure that it is regular, and most importantly, a very decent earnings.And it is quite natural that in this business can not do without special tools, a number of which are considered to be the hand-mill, which is a multi-functional high-power devices.It is through the router manual in the wood and plywood facades, door casings and parts of furniture, designed for the future assembly, you can perform simple and curly grooves, allocate textured panels, cut perfectly aligned holes of any diameter, and most importantly, carry through or concave shaped ornaments andpatterns of the most bizarre and complicated configuration.
We should not be afraid of difficulties in carrying out the above process, because a router work is nothing complic
If the router is needed for production purposes or shape cutting the thick array, then it is better to fork out and buy a professional multifunctional device with user friendly features "Vacuum Cleaner", which implies mounting the hose, through which all the sawdust and dusttotally eliminated from the workplace, leaving him in a perfectly clean condition.For a router need a special table or, at worst, a thick sheet of plywood or solid wood, which can be attached ordinary corners or rails designed for durable fixation of the processed material.In this way, secure the door trim or wood sheets and plywood, which must be carefully cut, performing a perfect edge.And thus it is possible to work not only on the edge of the single sheet, but also pre-glued together materials (lumber, plywood, chipboard, fiberboard, wood, etc.).
work hand router allows all-only a few minutes to draw perfectly straight cut at an angle of ninety degrees to virtually any thickness, which can be veneered if desired.In the same manner or operate shaped grooves under operating assembly in straight lines or in a rounded form (textured panels and so forth.).To perform a deep or through-thread in a circle in the center of its conditional clog special pin with a hole (as an option, you can use a regular nail without a hat).After that, the installed stud, measure the desired range, and in this place fixed router, or rather its mill in the raised position, connecting the unit to the center of the circle a special guide.Thus the work is clearly on a given circle, until it closes at one point.cutter immersion depth is adjusted depending on the through-hole to be or simply textured.
more or less understood the most simple tasks, which can easily handle the milling machine, it is advisable to proceed to a detailed description of the most popular techniques - deep curly or through cutting is carried out in several stages.It is through the use of a manual mill run patterns on the array and the plywood of almost any complexity and configuration.But it should clarify the nuance that the router "goes" vinyl exclusively on pre-applying the stencil, and it is not about the paper pattern through which the applied pattern itself, although this step is also provided in this paper, and on the handling of its contours thin mill(about six millimeters in diameter) with a small immersion depth.But all in good time and to begin to describe all the stages of shape cutting.Thus, the first leaf of the tree is prepared in a certain way, degreasing and removing dust from it.
Thereafter it with a conventional adhesive tape securing the paper template with pre-cut pattern on top and spray paint from a container of any contrasting color.When it dries, the pattern can be removed, and the outlines of a pattern to restore using a black marker, and should not fear that the tree will be, because as pen and ink to be completely sawn mill with a tree located in these areas.Then, the intended milling contour traversed thin nozzle, thus performing the same stencil, mentioned more above.
nozzle change on large, by means of which all the internal contents of the designated stencil completely hollowed out, resulting in a deep or through pattern (depending on the size of the cutter immersion).Do not forget about such an important step, as grinding, for which a separate broad tip, because only in this way the work can be done perfectly smooth.