How to use a router manual : Safety instructions for use
Miscellaneous / / August 12, 2017
- milling high-power machine with different attachments
- milling table
No wonder that a material such as natural wood, continues to enjoy enormous popularity of modern designersand is widely used for decorating the interior of various kinds, it is not only very impressive and stylish, but also environmentally friendly.Work a router as an integral part of using this product is nothing complicated and at the same time opens up new horizons in the art of carpentry (and this is really an art) to each person who decides to become a master, or just dreaming about how to create somethingsomething beautiful and truly useful with his own hands.Working with the hand router can become one of the most exciting activities, because the product to spoil this tool is practically impossible, and the pleasure of truly impressive result - weight.
Ways of how to work the hand router, very little, despite the fact that it is a multi-functional high-power devices.Typically, this devic
If it is assumed some hard work or the performance of shaped elements on a thick tree, including through the slots at a fairly impressive depth, or in the future, production will be put on stream, it is better of course to fork outa powerful unit with a large number of nozzles, high-quality grinding and control the rotation speed of the main drive, and the immersion depth of the cutter.The average cost of routers usually starts from the 3000 Russian rubles and can reach ten thousand and more, especially if implemented kit with a special board with angled mounting bracket / rails and the supply hose cleaner that instantly absorbs all the dust and dirt, leaving the workplace and the processed materialin a perfectly clean condition.It should be noted that the function of the so-called "vacuum" is vital if curly and cutting through to a greater depth.
himself router is a device with comfortable handles and durable disc-base through a hole which is lowered to the desired depth cutter (rotary drill), cutting out the desired pattern, grinding or through-hole.The easiest way to design the outer edge is performed, for which the router is fixed on a strictly specified distance from a predetermined track.Thus it is possible to process not only a single sheet, but the sheets glued together (lumber, plywood, veneer, etc.).To perform the curly or production (for future assembly) slots, enough to change the nozzle, wherein the milling is performed by setting as a guide.To drill a perfectly straight hole with a large radius, in a sheet, but rather the future center of the circle is inserted into a special pin, which is delayed by the desired radius for milling installation itself.
then the central pin is connected to a router (for this purpose in the device there is a special hole) of the guide, which is rigidly fixed in one position.Following these simple manipulations of the router being in a circle with the help of a guide mounted to the complete circumference of the circuit.In the same way it can be performed not only through holes, but also circular or shaped grooves facade panels (single, double, etc.).Regarding the shape cutting, the cutter is always "walks" stenciled exclusively regardless of whether designs were provided through the master or not.Moreover, the term "template" is meant not the usual patterning through a mask, at this stage is also an integral component of the whole process, and fine cutting special nozzle-mill.
work stroke provides a special procedure for execution.To start a pre-degreased surface paste with a conventional adhesive tape through paper stencil with a pre-ornament or pattern formed on it, after which the surface was treated with paint from a container of any contrasting matte hue (color does not matter, since the surface in consequence of all will bedeleted cutter).After it is completely dry pattern is removed, and the contours of the figure suggest a black marker or felt-tip pen and start to implement the so-called volumetric stencil over which the router and it will work.
To do this, all circuits are processed on a thin cutter is not very deep water, and then change the nozzle and produce already deep or through ornamental milling (the value of immersion is given on the instrument).Usually these manipulations is not enough work to be perfectly clean and therefore it is necessary to change the nozzle to the grinding and once again walk through a router ornament.