How to calculate the size of curtains ?
Needlework / / August 12, 2017
- window with a cornice
- Common sense
Select the appropriate curtains model and perform a sketch of their appearance on the window.Set the number of parts needed for curtains and molding paint scheme.Determine treatments of upper and lower sections, the presence, location and rate draperies, location and depth of folds, the location and dimensions of trim and apply this data to the circuit.How to choose the right size curtains?Curtains can be from the eaves to the middle of the window if the sill hostess enjoys a work surface or to the window sill, if you want to leave open radiators, or not reach the floor by 3-5 cm.
length classical paintingsdirect curtains without allowances for processing the upper and lower sections is defined as the desired length of the finished curtains on the bottom shtory.Esli planned sewing on finishing braid with a fringe, beads, decorative tassels, fabric length can be adjusted downwards by the width
allowance for processing the upper edge of the curtains depends on the method of fixing the curtains on the ledge: for classic hooks and curtain tapes 1.5-2 cm, without clamps curtain tape - 2-5 cm, the eyelets - diameter plus grommet4-5 cm, textile braid -. 4-5 cm allowance for processing the lower cutoff curtains depends on the method of processing and material possibilities.If the bottom is enclosed in, allowance is not needed.If the bottom of the curtains nastrachivaetsya braid-fringe or other decoration is given an allowance of 1-2 cm. If the bottom seam processed vpodgibku closed cut, the size of the allowance can vary from 2 to 20 cm, and the larger this value, the less likely it isWrong part of the fabric that will be visible at the bottom of inadvertent pulling away.
in widths classic straight solo curtains equal to the length of the cornice, multiplied by a factor of assemblies in width (from 1 to 2.5), plus allowances for processing the side sections (1.5-3 cm).If the curtain is made sliding of two parts, the basis for calculation is the half of the length of the cornice.
How to calculate the size of the blinds in the presence of folds and assemblies?To account for the assembly along the length or width of the web with the length of the planned assembly of the shelf assembly is multiplied by the coefficient (1 for smooth webs to 3-3.5 in the presence of a dense assembly).To make the folds to the length or width Polona need to add two planned depth of wrinkles.Site assembly and folds layout sketch is in the scheme of curtains detail in the detailed calculation of the size of paintings.
Tip: would not have been executed calculation curtains size, buy a little more fabric.Some textile materials shrink when ironing, and if they remain unused piece of it can be made or grab decorative flower for curtains.
12 Aug, 2017
12 Aug, 2017