How to sew roman blinds ?
Needlework / / August 12, 2017
- Cloth curtains
- Braid for scenes, textile braid
- Frame trims
- plastic rings, cable
Roman Blindsit is good in that it blends harmoniously with any interior, easy to use and economical to manufacture.For its manufacture buy painting the following dimensions: length = length of the curtains off the shelf + allowance at the bottom of the processing of 6 cm + allowance for processing the upper edge 4 cm;width = width of the cornice + 2 cm on each side for processing the side sections.
How to make Roman shades yourself?Start by treating the side sections.Tuck them inside out twice at 1 cm and scribbling seam width of 1 mm.Next, it is necessary to mark the places of location of the scenes on the curtain.With a series of inner side draw horizontal lines on the number of frame bars, and consequently wrinkling.The distance from the lower edge of the curtains to the first horizontal line should be from 15 to 30 cm - in this area is not going to fold.T
According to the planned lines from the inside braid is applied to the scenes.She nastrachivaetsya seam width of 1 mm from the two longitudinal sides thereof.Bottom curtains turned in inside 1 cm, followed by 5 cm and zastrachivaetsya seam width of 1 mm.Educated pocket will be used as a place to strap-weight material.The upper section is turned in inside blinds 1 cm, then by 4 cm and the seam also zastrachivaetsya width of 1 mm.Then the treated oversize upper edge overlaps of the textile tape, Velcro or otherwise, and nastrachivaetsya seam width of 1 mm in two lines on the longitudinal section.This Velcro curtain will be mounted on the ledge.
The question: "How to sew roman shades" - remains to consider the lifting mechanism.For organizations that need to identify the mechanism of plastic rings on the location of the tape segments for the scenes.They can be sewn in 3 or 4 rows, with extreme ranks should be located no closer than 5 cm from the sides of the curtains.Follow baster location chalk rings inside out curtains, hand sew the ring only to the band.The stitches should not be visible from the front side curtains.
Insert the strap into the prepared scenes and pockets, side entrances scribbling scenes, getting in line for the side edges.Cut the cord length equal to the length of the curtain + curtains + width of 1.5 meters.The segments of the cord tie on the lower rings and pass through the respective vertical rows of rings.Secure the curtain on the ledge, pass the cords in the corresponding rings on the ledge and print on one side of the curtain.The ends of the cords for a side of the ring on the ledge to weave pigtail easy to use length and the remainder cut.Curtain ready.
12 Aug, 2017