How to make a trough for chickens with their hands ?
Animals / / August 12, 2017
- Bank to cover
method of drip hose, is the easiest way for the manufacture of drinkers for chickens and hens.Attach the hose to the tap.Bend the free end of the garden hose so that the hose had to form droplets, and fix it.You should get a teardrop shape of the hose.Hang the hose narrow end up.The height should be such that the chicken would be able to get the beak to the hose.
Make a small hole in the hose at the bottom of the drop-shaped to allow a very small amount of dripping water.Turn on the tap, that would be the water was slow.Of the holes are dripping droplets that chickens can drink.Such drinkers for chickens with their hands work well as a temporary solution, but are not recommended for long-term use, because over time you will spend a lot of water.
very widely used method for chickens with water using buckets.You need to find a bucket that has a tight lid seal, such as large banks (buckets) paint, which must be careful
Drill small holes in the rim of the bucket with a lid, about 2 cm from the top of the rim or slightly below the lid.Fill the waterers for chickens (a bucket) of water and a good lock cover.Turn the bucket in the pan, so that the water began to drip from the jar in a pan.The water level will rise to the level of the holes.As the chickens drinking water, the liquid will again be a slow drip from a bucket.
Chicken waterers to cold weather and freezing temperatures.Not everyone knows how to make a water bowl for chickens, for cold pores.To avoid water freezing in the winter, many farmers use a little trick.They build a small wooden platform for the drinkers, and install a light bulb with an extension under the platform.Heat platform makes the water at the bottom of the bucket sufficiently warm so that it can flow out of the hole as needed.