How to make a hunting knife ?
Needlework / / August 12, 2017
- blade knife
- Sawn handle
- Hand tools
order to produce high-quality and sturdy hunting knife, you must choosegood strong blade.Find it is not so difficult.This may be a blade with knives for throwing, but it is better if it is produced by, from a piece of steel.To make the blade of his hands need a piece of steel, pre-cut to fit the future of the blade, with a small margin.It is recommended to grind to the desired shape, then a few times to escalate and, using a hammer to align.
After the hardening process is recommended to be not bad, if the cooling liquid oil, rather than plain water is used: the probability that the knife overtempered, much less.At the end of the blade is recommended to treat with abrasive materials.
further instructions on how to make a hunting knife, you can start making the handle.The main rule to follow during its production: the handle should lie comfortably in the hand, to be warm and comfortable.It is necessary to s
The workpiece is necessary to drill a hole from the end to which you want to insert a knife blade tail.To make it firmer hold, it is recommended to put it on the adhesives, such as epoxy glue.Sand the handle must be given cupped to lay the knife handy.It should be remembered that the blade and the handle should be as balanced.Optionally, the handle can be obtyanut thin layer of skin, so that it does not slip on the hand.
basic steps of how to make a hunting knife with his hands, had already passed and the resulting blade is ready to use.But a good knife should be protected as much as possible while he is out of work, so you can continue to make the sheath.To manufacture the sheath can be made of wood, carved with a chisel by the size of the blade groove, or sew leather.In the second case, the blade will be more beautiful look, but will need to produce a special patch on the sharpened part of the blade to cut through the sheath is not with the times.
12 Aug, 2017