How to change the rear-view mirror ?
Repair And Maintenance / / August 12, 2017
- adjusting wire
- new glass
To remove a mirror, you need to remove all the caps, which are mounted near the door.Behind them lies a couple of screws that need to be unscrewed with a screwdriver and then carefully to get the mirror.Now you can begin to understand it.To remove the reflective element, it is necessary to pry gently with your fingers and pull out of the mounts.
Do not make too drastic action to not break anything.If you cling to your fingers does not work, you can use a screwdriver wrapped in cloth, so as not to damage the surface.It is necessary to explore the internal mechanism of the mirror, as is often the cause of failure becomes a rope wear, which is responsible for regulation.It can be removed from any of the broken mirror, or buy a new one.
The next step is to change the rear-view mirror is necessary to unscrew the screws that hold the rotating platform, namely the cable is hidden underneath.Next you need to uns
Inside will be a few ropes of different colors (blue, yellow, red).Of these, you need to find a worn, and a similar change.If the opportunity presents itself, you need to change all three rope.First, they are inserted in the turntable when in the adjustment lever.
As becomes clear, nothing complicated about how to replace the rear-view mirror, no.If the reflective element is damaged, it is also necessary to change to a new one.To do this, you need only to pull the old mirror of latches and put a new one.Collect the mirror should be in reverse order, so nothing to confuse.
installing a car is recommended to immediately verify its operability.If after the disassembly and assembly of the mirror so do not start to function properly, it needs to be changed together with the body.This replacement will cost much more expensive, but more reliable.