How to change a light bulb dimension ?
Repair And Maintenance / / August 12, 2017
- Cotton gloves
- new light
- Plastic caps
first step is to disconnect the car.To do this, just open the hood and remove the battery from both terminals.One can not in the case of some light bulbs to change dimension when the ignition is switched on or when the battery.If something is done incorrectly, inaccurately, it can cause more serious damage.
necessary to wash the car from behind, so that the dirt does not hit when changing dimension in the internal grooves.To give yourself more space available for the work necessary to open the boot lid.It is necessary to carefully detach the lining, which must be attached to the plastic clips.They are fragile and can easily break off.
The following step instructions how to change the dimensions of the need to find the wires that lead to their back side.It is necessary to carefully disconnect all their pads without breaking fastening.Now find the screws, by which the marker is attached to the
Do not make any sudden movements that do not break.On the back of the envelope should be placed a plastic cap, which is fastened the bolt.It needs to be carefully unscrew and remove.Under it are terminals, holding a light bulb.Gently pulling them to the side and down, they need to pull back and then remove the bulb from the landing nest.
left the final stage of instructions on how to change a light bulb dimension - it is necessary to put a new light element.It is strictly forbidden to touch his hands without gloves, as the lamp can burn when first turned on.If the preceding paragraph has not been observed, it is recommended to wash gently with alcohol lamp, then set into place and collect the envelope.
No need to rush to collect trim.You must first turn on the battery terminals to check whether the new light element is illuminated.If all OK - the car is ready to leave again on the road in the dark or bad weather.If the possibility of their own to replace the lamp envelope - no, it is necessary to contact the service center.