How to make the fuse for fireworks ?
Fireworks / / December 12, 2017
- thin rope
- kerosene or gasoline
- lead nitrate
- sulfur from matches
For many years, no holiday is complete withoutpyrotechnic articles, which include firecrackers.Make firecrackers at home is quite simple and the main part of the manufacturing is to create a wick.There are several simple ways for applications that do not need any special expertise, but, unfortunately, not all of them are equally good.
One of the easiest options is the impregnation of thin rope combustible materials, for example, it may be kerosene or gasoline.To do this, you need to completely soak the rope and then gently squeeze, but this option has significant drawbacks.The fact that the rate of combustion of the wick is too high - one meter for 4-6 seconds burns.
How to wick more convenient and affordable.There is another way, for which you need a rope, it is important to remember that it should be entirely of natural materials, and nitrate, which is used by growers ma
It must be dissolved in water, until the solution becomes very busy.Simply determine this, as soon cease nitrate dissolved in water, it may be immersed in the prepared cable and soaked in the resulting solution for several hours.After all of the procedures performed, the resulting wick should be thoroughly dried.How to make the fuse for fireworks, so he burned as slowly as possible.
soaked in nitrate combustion wick has a speed of about ten centimeters for two or three seconds.If instead of nitrate use of lead nitrate, is made so the wick will have the lowest rate of combustion.The easiest way to prepare the wick - paper roll tube stuff sulfur removed from the matches.Which of the above methods is the best depends on the purpose for which the fuse is manufactured.